<?xml version="1.0" encoding="utf-8"?>
<rss version="2.0">
  <channel>
    <title>NDT技术论坛 - 网上答疑</title>
    <link>https://www.wusunjiance.org/forum-293-1.html</link>
    <description>Latest 20 threads of 网上答疑</description>
    <copyright>Copyright(C) NDT技术论坛</copyright>
    <generator>Discuz! Board by Comsenz Inc.</generator>
    <lastBuildDate>Mon, 02 Nov 2026 10:06:49 +0000</lastBuildDate>
    <ttl>90</ttl>
    <image>
      <url>https://www.wusunjiance.org/static/image/common/logo_88_31.gif</url>
      <title>NDT技术论坛</title>
      <link>https://www.wusunjiance.org/</link>
    </image>
    <item>
      <title>双晶探头聚焦声场的盲区是多少？</title>
      <link>https://www.wusunjiance.org/thread-11184-1-1.html</link>
      <description><![CDATA[双晶探头聚焦声场的盲区是多少？
双晶探头为了防止发射声波被接收晶片直接接收，在探头内部加装隔声块进行隔离，受隔声块厚度影响双晶探头也存在一定范围的盲区（图2中红色部位）。双晶探头的声场盲区通常较小，一般在几 ...]]></description>
      <category>网上答疑</category>
      <author>付兴森</author>
<enclosure url="https://www.wusunjiance.org/data/attachment/forum/202512/31/080728kkpwdawjgltwmedm.jpg" length="36332" type="image/jpeg" />      <pubDate>Tue, 30 Dec 2025 14:40:34 +0000</pubDate>
    </item>
    <item>
      <title>A-SCAN 和 B-SCAN</title>
      <link>https://www.wusunjiance.org/thread-11172-1-1.html</link>
      <description><![CDATA[A-SCAN 和 B-SCAN
A-SCAN
定义：A-SCAN（幅度扫描）是一种一维的显示方式，通常用于显示信号的幅度随时间的变化。
特点：
以时间为横轴，信号幅度为纵轴。
主要用于显示单一测量点上的回波强度随时间的变化。
应用：
雷达 ...]]></description>
      <category>网上答疑</category>
      <author>付兴森</author>
<enclosure url="https://www.wusunjiance.org/data/attachment/forum/202508/08/095830isw12256w5p17h25.jpg" length="11146" type="image/jpeg" />      <pubDate>Fri, 08 Aug 2025 02:02:21 +0000</pubDate>
    </item>
    <item>
      <title>超声波探头为什么不能单独使用？</title>
      <link>https://www.wusunjiance.org/thread-11170-1-1.html</link>
      <description><![CDATA[超声波探头为什么不能单独使用？近期经常接到客户来电咨询超声波探头，都是想单独买个超声波探头安装在机器人或自动化设备上去测量工件厚度。

首先在没有任何配套软件或测量设备的情况下，单独购买超声波探头通常是无法 ...]]></description>
      <category>网上答疑</category>
      <author>付兴森</author>
<enclosure url="https://www.wusunjiance.org/data/attachment/forum/202508/06/113800acl33bff3dy6oaxl.jpg" length="61979" type="image/jpeg" />      <pubDate>Wed, 06 Aug 2025 03:38:49 +0000</pubDate>
    </item>
    <item>
      <title>检验与检测，检验报告、检测报告与检验检测报告之间有什么区别？</title>
      <link>https://www.wusunjiance.org/thread-11167-1-1.html</link>
      <description><![CDATA[检验与检测，检验报告、检测报告与检验检测报告之间有什么区别？
检验与检测的定义及区别术语定义来自于GB/T 27000-2023/ISO/IEC 17000:2020。1、检验（Inspection）定义：对合格评定对象的审查，并确定其与具体要求的符 ...]]></description>
      <category>网上答疑</category>
      <author>付兴森</author>
<enclosure url="https://www.wusunjiance.org/data/attachment/forum/202507/22/085318gfa6wq28f4fb4zf3.jpg" length="55599" type="image/jpeg" />      <pubDate>Tue, 22 Jul 2025 00:52:56 +0000</pubDate>
    </item>
    <item>
      <title>有没有朋友可以分享下《GB 12459-2017钢制对焊管件类型与参数》</title>
      <link>https://www.wusunjiance.org/thread-11124-1-1.html</link>
      <description><![CDATA[RT

拜谢~
坛子里找了一圈没发现这个]]></description>
      <category>网上答疑</category>
      <author>检测养家</author>
      <pubDate>Wed, 18 Dec 2024 07:58:13 +0000</pubDate>
    </item>
    <item>
      <title>求教下，有没有老师同学了解浙江的渗透考试？</title>
      <link>https://www.wusunjiance.org/thread-11113-1-1.html</link>
      <description><![CDATA[想请教下，浙江PT1的考试题型，有判断题吗？]]></description>
      <category>网上答疑</category>
      <author>检测养家</author>
      <pubDate>Tue, 12 Nov 2024 12:12:35 +0000</pubDate>
    </item>
    <item>
      <title>轴类零件超声检测探头移动轨迹</title>
      <link>https://www.wusunjiance.org/thread-11106-1-1.html</link>
      <description><![CDATA[请问超声检测轴类零件时，直探头外圆检测纵向、周向缺陷的相对移动轨迹和斜探头检测纵向、横向缺陷的相对移动轨迹是什么方式？]]></description>
      <category>网上答疑</category>
      <author>gl9855</author>
      <pubDate>Tue, 01 Oct 2024 03:00:48 +0000</pubDate>
    </item>
    <item>
      <title>超声波直探头2.5P和5P有什么区别？</title>
      <link>https://www.wusunjiance.org/thread-11032-1-1.html</link>
      <description><![CDATA[超声波直探头2.5P和5P有什么区别？

超声波直探头是一种用于非破坏性检测的超声波传感器，通常用于测量材料的厚度、发现孔洞和缺陷等。超声波直探头的尺寸和频率会影响其检测性能。
2.5P和5P表示的是直探头的频率，分别为2.5MHz和5MHz。这两种直探头虽然都能检测缺陷和 ...]]></description>
      <category>网上答疑</category>
      <author>付兴森</author>
      <pubDate>Mon, 01 Jan 2024 04:06:25 +0000</pubDate>
    </item>
    <item>
      <title>超声波探头保护膜的作用是什么？</title>
      <link>https://www.wusunjiance.org/thread-10955-1-1.html</link>
      <description><![CDATA[超声波探头保护膜的作用是什么？
超声波探头保护膜是保护晶片和电极层不被磨损，改善探头与试件耦合作用。

超声波探头压电晶片前面一般都加保护膜，其作用是保护压电晶片和电极，防止磨损和碰坏，改善超声波探头与被探工件耦合。保护膜必须耐磨性能好、强度高、材质声 ...]]></description>
      <category>网上答疑</category>
      <author>付兴森</author>
      <pubDate>Sat, 22 Jul 2023 10:01:21 +0000</pubDate>
    </item>
    <item>
      <title>超声波探头中的阻尼块的作用是什么？</title>
      <link>https://www.wusunjiance.org/thread-10954-1-1.html</link>
      <description><![CDATA[超声波探头中的阻尼块的作用是什么？
超声波探头阻尼块对压电晶片的振动起阻尼作用，
一、可使晶片起振后尽快停下来，减少脉冲宽度，提高分辨力；
二、吸收晶片向背面发射的超声波，减少始脉冲杂波；
三、支撑晶片的安放。


阻尼块也称吸收块，通常用钨粉和环氧树脂按 ...]]></description>
      <category>网上答疑</category>
      <author>付兴森</author>
      <pubDate>Sat, 22 Jul 2023 09:47:40 +0000</pubDate>
    </item>
    <item>
      <title>对接焊缝的超声波探伤为什么都是在焊缝两侧的母材上用斜探头？</title>
      <link>https://www.wusunjiance.org/thread-10828-1-1.html</link>
      <description><![CDATA[对接焊缝的超声波探伤为什么都是在焊缝两侧的母材上用斜探头？①在焊缝母材两侧表面进行探测便于检出焊缝中各个方向的缺陷；
②便于使用一次、二次声程扫查整个焊缝截面，不会漏检；
③有些缺陷在一侧面发现后，可在另一侧面进行验证；
④一般母材表面光洁度比焊缝高， ...]]></description>
      <category>网上答疑</category>
      <author>傅兴森</author>
      <pubDate>Sat, 19 Nov 2022 06:58:07 +0000</pubDate>
    </item>
    <item>
      <title>超声波探伤仪的探伤速度是多少？</title>
      <link>https://www.wusunjiance.org/thread-10815-1-1.html</link>
      <description><![CDATA[超声波探伤仪的探伤速度是多少？焊缝超声波探伤速度：每分钟1.5米；

锻件超声波探伤速度：根据GB/T 6402-2008，第5页，12.5的说明，每秒150mm，即：每分钟9米。

注：超声波探伤仪现场实际检测速度会因操作人员的熟练度，待检工件的形状、尺寸、表面特征（如是否光滑） ...]]></description>
      <category>网上答疑</category>
      <author>傅兴森</author>
      <pubDate>Wed, 12 Oct 2022 02:00:39 +0000</pubDate>
    </item>
    <item>
      <title>超声波探伤仪可检测的最小缺陷是多大？</title>
      <link>https://www.wusunjiance.org/thread-10812-1-1.html</link>
      <description><![CDATA[超声波探伤仪可检测的最小缺陷是多大？（图中ΦA=1.6mm，是指气孔缺陷大小为1.6毫米）
1、点状，孔径：超声波探伤仪可检测的最小缺陷理论值是0.029mm，需要超声波显微镜级别的设备；CSM900系列超声波探伤仪检测100mm的碳钢时为0.1mm。
2、裂纹宽度：超声波探伤仪可检测 ...]]></description>
      <category>网上答疑</category>
      <author>傅兴森</author>
      <pubDate>Wed, 12 Oct 2022 01:31:29 +0000</pubDate>
    </item>
    <item>
      <title>超声波探伤时为什么要使用试块？</title>
      <link>https://www.wusunjiance.org/thread-10811-1-1.html</link>
      <description><![CDATA[超声波探伤时为什么要使用试块？答：超声波探伤中使用的超声波试块分为标准试块和对比试块两大类。

1. 超声波标准试块具有规定的材质、表面状态、几何形状与尺寸，可以用来评定和校准超声波探伤仪器。

2. 超声波对比试块是以特定方法检测特定试件时所用的试块。

3.  ...]]></description>
      <category>网上答疑</category>
      <author>傅兴森</author>
      <pubDate>Wed, 12 Oct 2022 01:29:10 +0000</pubDate>
    </item>
    <item>
      <title>数字超声波探伤仪的闸门是什么意思？</title>
      <link>https://www.wusunjiance.org/thread-10810-1-1.html</link>
      <description><![CDATA[数字超声波探伤仪的闸门是什么意思？超声波探伤时屏幕上会出现很多波形（始波、缺陷波、底面波），要读哪个波形的数据呢，这时就要用到闸门，将闸门移动到要读取的波形上，这时屏幕右侧出现的检测数据就是该波形的数据。

数字超声波探伤仪最突出的特点是能够把有关反射 ...]]></description>
      <category>网上答疑</category>
      <author>傅兴森</author>
      <pubDate>Wed, 12 Oct 2022 01:26:19 +0000</pubDate>
    </item>
    <item>
      <title>超声波探伤仪探头的主要作用是什么？</title>
      <link>https://www.wusunjiance.org/thread-10809-1-1.html</link>
      <description><![CDATA[超声波探伤仪探头的主要作用是什么？1、超声波探伤仪的探头是一个电声换能器，并能将返回来的声波转换成电脉冲；

2、控制超声波的传播方向和能量集中的程度，当改变超声波探头入射角或改变超声波的扩散角时，可使声波的主要能量按不同的角度射入介质内部或改变声波的指 ...]]></description>
      <category>网上答疑</category>
      <author>傅兴森</author>
      <pubDate>Wed, 12 Oct 2022 01:23:15 +0000</pubDate>
    </item>
    <item>
      <title>超声波探伤仪的充电电压是多少？</title>
      <link>https://www.wusunjiance.org/thread-10808-1-1.html</link>
      <description><![CDATA[超声波探伤仪的充电电压是多少？
1.从全世界来看，超声波探伤仪充电器（电源适配器）可使用的外界电压范围：110V~220V；

2.没有任何国家的超声波探伤仪使用380V充电；

3.经充电器（电源适配器）变压后，给超声波探伤仪的供电电压一般在7.2V~12.0V之间，9V最优。

 ...]]></description>
      <category>网上答疑</category>
      <author>傅兴森</author>
      <pubDate>Wed, 12 Oct 2022 01:18:35 +0000</pubDate>
    </item>
    <item>
      <title>EN ISO9712和ISO9712有何区别？获取EN ISO9712证书后是否获得认可？</title>
      <link>https://www.wusunjiance.org/thread-10802-1-1.html</link>
      <description><![CDATA[EN ISO9712和ISO9712有何区别？获取EN ISO9712证书后是否获得认可？
对于初次接触ISO9712和EN ISO9712的人或许有些迷糊，产生些许疑问，进而发出“什么是ISO 9712？”,\&quot;我想考取EN ISO9712的证书能否获得认可？\&quot;，“ISO9712和EN ISO9712有何区别”，“我能在什么地方申 ...]]></description>
      <category>网上答疑</category>
      <author>傅兴森</author>
      <pubDate>Sun, 02 Oct 2022 10:43:37 +0000</pubDate>
    </item>
    <item>
      <title>求答案</title>
      <link>https://www.wusunjiance.org/thread-10782-1-1.html</link>
      <description><![CDATA[2.68 碳素钢的主要组织是，各种组织的磁导率大小排列为（ ）
A.铁素体＞珠光体＞马氏体＞渗碳体＞奥氏体
B.马氏体＞铁素体＞珠光体＞渗碳体＞奥氏体
C.铁素体＞马氏体＞珠光体＞渗碳体＞奥氏体
D.铁素体＞马氏体＞珠光体＞奥氏体＞渗碳体
特检题库答案是A，但特检磁粉教 ...]]></description>
      <category>网上答疑</category>
      <author>minghuanfang</author>
      <pubDate>Tue, 28 Jun 2022 07:10:21 +0000</pubDate>
    </item>
    <item>
      <title>探头位置插错会影响探伤吗</title>
      <link>https://www.wusunjiance.org/thread-10717-1-1.html</link>
      <description><![CDATA[我们的探伤仪上面有R和T/R两个接口，我们使用的是单晶探头，接在R接口上，不知道是否会对探伤有影响？]]></description>
      <category>网上答疑</category>
      <author>wuxitaihu</author>
      <pubDate>Fri, 03 Jun 2022 02:11:48 +0000</pubDate>
    </item>
  </channel>
</rss>