| 美国: |
| AMS 7295/1A-9A | 工业射线照相胶片和纸 |
| AMS 7295/ 8B | X射线照相纸2.5-80 Radiographic Paper, 2.5-80 B |
| AMS 7295/ 9B | X射线照相纸2.0-80 Radiographic Paper, 2.0-80 B |
| ARP 1611A | 痕迹荧光透视法和X射线照相法相结合的质量检验方法 |
| AS-1613A-88 | 射线照相图象质量指示器 |
| AS 7114 | 美国宇航局与国防部订约授权程序(NADCAP)要求-无损检测 |
| AS 7114/ 4 | 美国宇航局与国防部订约授权程序(NADCAP)要求-X射线照相无损检测设备 |
| EN 2002/ 21 | 美国宇航系列-金属材料试验方法-第21部分-铸件的X射线照相检测 |
| ASTM A 754/A 754M-1996 | X射线荧光法测量涂层厚度的试验方法 Test Method for Coating Thickness by X-Ray Fluorescence |
| ASTM B567-1998 | 用β射线背散射法测量涂层厚度的试验方法 |
| Test Method for Measurement of Coating Thickness by the Beta Backscatter Method |
| ASTM B568-1998 | χ射线光谱仪法测量涂层厚度的试验方法 |
| Test Method for Measurement of Coating Thickness by X-Ray Spectrometry |
| ASTM C637-1998 | 辐射屏蔽混凝土用集料的标准规范 |
| Standard Specification for Aggregates for Radiation-Shielding Concrete |
| ASTM C638-1992 | 辐射屏蔽混凝土集料组分的描述术语 |
| Descriptive Nomenclature of Constituents of Aggregates for Radiation-Shielding Concrete |
| ASTM C1455-2000 | 用γ射线谱法无损检定仍然有效特殊核材料指南 |
| ASTM D2599-1987 | X射线光谱法测定汽油含铅量的试验方法(05.02) |
| Test Method for Lead in Gasoline by X-Ray Spectrometry (05.02) |
| ASTM D4294-1998 | 用非色散X射线荧光光谱法测定石油产品中含硫量试验方法 |
| Sulfur in Petroleum Products by Non-Dispersive X-Ray Fluorescence Spectrometry, Method of Test for (05.02) |
| ASTM D4452-1985 | 土壤样品的X射线照相法 X-Ray Radiography of Soil Samples |
| ASTM D5059-1998 | X-射线光谱法测定汽油含铅量的试验方法 |
| Test Method for Lead in Gasoline by X-Ray Spectroscopy (05.03) |
| ASTM D5187-1991 | X射线衍射法测定煅烧石油焦炭中结晶尺寸(LC)的试验方法 |
| Test Method for Crystallite Size (LC) of Calcined Petroleum Coke by X-Ray Diffraction (05.03) |
| ASTM D6247-1998 | X射线荧光光谱法分析聚烯烃中元素含量的试验方法 |
| Test Method for Analysis of Elemental Content in Polyolefins by X-Ray Fluorescence Spectrometry |
| ASTM E94-2004(2010) | 射线照相检验标准指南 Standard Guide for Radiographic Examination |
| ASTM E142-1996 | 射线照相检测的质量控制方法 Method for Controlling Quality of Radiographic Testing |
| ASTM E155-2010 | 铝镁合金铸件射线照相检验标准参考照片 |
| Standard Reference Radiographs for Inspection of Aluminum and Magnesium Castings |
| ASTM E170-1999 | 有关辐射测量和剂量测定的术语 |
| ASTM E181-1998 | 放射性核素探测器的校准和分析的一般方法 |
| General Methods for Detector Calibration and Analysis of Radionuclides |
| ASTM E186-2010 | 厚壁(50.8-114mm)钢铸件标准参考射线照片 |
| Standard Reference Radiographs for Heavy-Walled (2 to 4 1/2-In./50.8 to 114-mm) Steel Castings |
| ASTM E192-2004(2010)e1 | 宇航用熔模钢铸件标准参考射线照片 |
| Standard Reference Radiographs for Investment Steel Castings of Aerospace Applications |
| ASTM E242-2001(2010) | 某些参数改变时射线照相图象显示的标准参考射线照片 |
| Standard Reference Radiographs for Appearances of Radiographic Images as Certain Parameters Are Changed |
| ASTM E272-2010 | 高强度铜基及镍铜合金铸件的标准参考射线照片 |
| Standard Reference Radiographs for High-Strength Copper-Base and Nickel-Copper Alloy Castings |
| ASTM E280-2010 | 厚壁(114-305mm)铸钢件标准参考射线照片 |
| Standard Reference Radiographs for Heavy-Walled (4 1/2 to 12-in. (114 to 305-mm)) Steel Castings |
| ASTM E310-2010 | 锡青铜铸件标准参考射线照片 |
| Standard Reference Radiographs for Tin Bronze Castings |
| ASTM E390-2011 | 钢熔焊焊缝标准参考射线照片 |
| Standard Reference Radiographs for Steel Fusion Welds |
| ASTM E431-96(2011) | 半导体和相关器件射线照片判读指南 |
| Standard Guide to Interpretation of Radiographs of Semiconductors and Related Devices |
| ASTM E446-2010 | 厚度至50.8mm钢铸件的标准参考射线照片 |
| Standard Reference Radiographs for Steel Castings up to 2 in. (50.8 mm) in Thickness |
| ASTM E505-2001(2011) | 铝和镁压铸件检验的标准参考射线照片 |
| Standard Reference Radiographs for Inspection of Aluminum and Magnesium Die Castings |
| ASTM E545-2005(2010) | 确定直接热中子射线照相检验成象质量的标准试验方法 |
| Standard Test Method for Determining Image Quality in Direct Thermal Neutron Radiographic Examination |
| ASTM E586-88 | γ与χ射线照相检测的术语定义 |
| ASTM E592-1999(2009)e1 | 6～51mm厚钢板X射线照相检验和25～152mm厚钢板钴60照相检验获得ASTM当量穿透灵敏度的 标准指南 |
| Standard Guide to Obtainable ASTM Equivalent Penetrameter Sensitivity for Radiography of Steel Plates 1/4 to 2 in. (6 to 51 mm) Thick with X Rays and 1 to 6 in. (25 to 152 mm) Thick with Cobalt-60 |
| ASTM E665-1994 | 测量暴露在X闪光射线机的X射线照射下的材料中相对深度的吸收剂量 |
| Determining Absorbed Dose Versus Depth in Materials Exposed to the X-Ray Output of Flash X-Ray Machines |
| ASTM E666-1997 | γ或X射线剂量吸收的计算 Calculating Absorbed Dose from Gamma or X Radiation |
| ASTM E689-2010 | 球墨铸铁 标准参考射线照片 |
| Standard Reference Radiographs for Ductile Iron Castings |
| ASTM E746-2007 | 测定工业射线照相成像系统相关图象质量响应的 标准方法 |
| Standard Practice for Determining Relative Image Quality Response of Industrial Radiographic Imaging Systems |
| ASTM E747-2004(2010) | 射线照相用线型象质计(IQI)的设计、制造及材料组分类的标准方法 |
| Standard Practice for Design, Manufacture, and Material Grouping Classification of Wire Image Quality Indicators (Iqi) Used for Radiology |
| ASTM E748-2002(2008) | 材料热中子射线照相标准方法 |
| Standard Practices for Thermal Neutron Radiography of Materials |
| ASTM E801-2006(2011) | 电子装置射线照相检验的质量控制标准方法 |
| Standard Practice for Controlling Quality of Radiological Examination of Electronic Devices |
| ASTM E802-1995(2010) | 厚度至114mm的灰口铸铁标准参考射线照片 |
| Standard Reference Radiographs for Gray Iron Castings up to 4 1/2 in. (114 mm) in Thickness |
| ASTM E803-1991(2008) | 确定中子射线透照束长径比的标准方法 |
| Standard Method for Determining the L/D Ratio of Neutron Radiography Beams |
| ASTM E915-1996 | 残余应力测量用X射线衍射仪校准检定的试验方法 |
| Test Method for Verifying the Alignment of X-Ray Diffraction Instrumentation for Residual Stress Measurement |
| ASTM E999-2010 | 工业射线照相胶片处理的质量控制标准指南 |
| Standard Guide for Controlling the Quality of Industrial Radiographic Film Processing |
| ASTM E1000-98(2009) | 射线照相检测标准指南 |
| Standard Guide for Radioscopy |
| ASTM E1025-2011 | 射线照相检测用孔型象质计设计、制造和材料组分类的标准方法 |
| Standard Practice for Design, Manufacture, and Material Grouping Classification of Hole-Type Image Quality Indicators(IQI) Used for Radiography |
| ASTM E1030-2005(2011) | 金属铸件射线照相检验的标准试验方法 |
| Standard Test Method for Radiographic Examination of Metallic Castings |
| ASTM E1032-2012 | 焊缝射线照相检验的标准试验方法 |
| Standard Test Method for Radiographic Examination of Weldments |
| ASTM E1079-2010 | 透射密度计校准的标准方法 |
| Standard Practice for Calibration of Transmission Densitometers |
| ASTM E1114-2009e1 | 测定铱192工业射线照相源尺寸的标准试验方法 |
| Standard Test Method for Determining the Size of Iridium -192 Industrial Radiopraphic Sources |
| ASTM E1161-2009 | 半导体和电子元件射线检验的标准方法 |
| Standard Practice for Radiologic Examination of Semiconductors and Electronic Components |
| ASTM E1165-2004(2010) | 用针孔成象法测量工业X射线管焦点的标准试验方法 |
| Standard Test Method for Measurement of Focal Spots of Industrial X-Ray Tubes by Pinhole Imaging |
| ASTM E1168-1995 | 核设施工人辐射防护训练 Radiological Protection Training for Nuclear Facility Workers |
| ASTM E1254-2008 | 射线照片及未曝光工业射线照相胶片储藏的标准指南 |
| Standard Guide for Storage of Radiographs and Unexposed Industrial Radiographic Films |
| ASTM E1255-2009 | 射线透视检验标准方法 |
| Standard Practice for Radioscopy |
| ASTM E1320-2010 | 钛铸件标准参考射线照片 |
| Standard Reference Radiographs for Titanium Castings |
| ASTM E1390-2012 | 工业射线照相观片灯标准规范 |
| Standard Specification for Illuminators Used for Viewing Industrial Radiographs |
| ASTM E1400-1995 | 高剂量辐射量测定校准实验室的特性和性能 规程 |
| Characterization and Performance of a High-Dose Radiation Dosimetry Calibration Laboratory, Practice for (12.02) |
| ASTM E1411-2009 | 射线照相系统鉴定的标准方法 |
| Standard Practice for Qualification of Radioscopic Systems |
| ASTM E1416-2009 | 焊缝射线检验的标准试验方法Standard Test Method for Radioscopic Examination of Weldments |
| ASTM E1441-2011 | 计算机层析（CT）成像的标准指南 |
| Standard Guide for Computed Tomography (CT) Imaging |
| ASTM E1441-2000 | 计算机层析成像（CT）指南 Guide for Computed Tomography (CT) Imaging |
| ASTM E1453-2009 | 含模拟或数字射线照相数据的磁带媒体存储标准指南 |
| Standard Guide for Storage of Magnetic Tape Media that Contains Analog or Digital Radioscopic Data |
| ASTM E1475-2002(2008) | 数字射线照相检验数据计算机化传输的数据区标准指南 |
| Standard Guide for Data Fields for Computerized Transfer of Digital Radiological Examination Data |
| ASTM E1496-2005(2010) | 中子射线照相尺寸测量的标准试验方法 |
| Standard Test Method for Neutron Radiographic Dimensional Measurements(With drawn 2012) |
| ASTM E1570-2011 | 计算机层析(CT)检验标准方法 |
| Standard Practice for Computed Tomographic (CT) Examination |
| ASTM E1647-2009 | 确定射线照相检测对比度灵敏度的标准方法 |
| Standard Practice for Determining Contrast Sensitivity in Radiology |
| ASTM E1648-1995(2011) | 铝熔焊焊缝检验标准参考射线照片 |
| Standard Reference Radiographs for Examination of Aluminum Fusion Welds |
| ASTM E1672-2006 | 选择计算机层析(CT)系统的标准指南 |
| Standard Guide for Computed Tomography (Ct) System Selection |
| ASTM E1695-1995(2006)e1 | 计算机层析(CT)系统性能测量的标准试验方法 |
| Standard Test Method for Measurement of Computed Tomography (Ct) System Performance |
| ASTM E1734-2009 | 铸件射线照相检验标准方法 |
| Standard Practice for Radioscopic Examination of Castings |
| ASTM E1735-2007 | 确定经4-25MV X射线曝光的工业射线胶片 相关成像质量的标准试验方法 |
| Standard Test Method for Determining Relative Image Quality of Industrial Radiographic Film Exposed to X-Radiation from 4 to 25 MV |
| ASTM E1742/E1742M-2011 | 射线照相检验标准方法 |
| Standard Practice for Radiographic Examination |
| ASTM E1814-1996(2007) | 铸件计算机层析(CT)检验标准方法 |
| Standard Practice for Computed Tomographic (CT) Examination of Castings |
| ASTM E1815-2008 | 工业射线照相胶片系统分类的标准试验方法 |
| Standard Test Method for Classification of Film Systems for Industrial Radiography |
| ASTM E1817-2008 | 使用典型象质计(RQIs)控制射线检验质量的标准方法 |
| Standard Practice for Controlling Quality of Radiological Examination by Using Representative Quality Indicators(RQI-s) |
| ASTM E1894-1997 | 选择脉冲X射线源用的剂量测定系统的标准指南 |
| Standard Guide for Selecting Dosimetry Systems for Application in Pulsed X-Ray Sources |
| ASTM E1931-2009 | X射线康普顿散射层析技术标准指南 |
| Standard Guide for X-ray Compton Scatter Tomography |
| ASTM E1935-1997(2008) | 校准和测量计算机层析(CT) 密度的标准试验方法 |
| Standard Test Method for Calibrating and Meausring CT Density |
| ASTM E1936-2003(2011) | 评估射线照相数字化系统性能的标准参考射线照片 |
| Standard Reference Radiograph for Evaluating the Performance of Radiographic Digitization Systems |
| ASTM E1955-2004(2009) | 与美国材料与试验协会ASTM E 390 参考射线照片等级比较钢中焊缝完善性的标准射线检验 |
| Standard Radiographic Examination for Soundness of Welds in Steel by Comparison to Graded ASTM E390 Reference Radiographs |
| ASTM E2002-1998(2009) | 测定射线照相图象总不清晰度的标准方法 |
| Standard Practice for Determining Total Image Unsharpness in Radiology |
| ASTM E2003-2010 | 中子射线照相波束纯度指示计制作的标准方法 |
| Standard Practice for Fabrication of the Neutron Radiographic Beam Purity Indicators [Metric] |
| ASTM E2007-2010 | 计算机射线照相标准指南（用于CR的标准指南）(可激射线发光[PSL]法) |
| Standard Guide for Computed Radiology (Photostimulable Luminescence (PSL) Method) |
| ASTM E2023-2010 | 制作中子射线照相灵敏度指示计的标准方法 |
| Standard Practice for Fabrication of Neutron Radiographic Sensitivity Indicator |
| ASTM E2033-1999(2006) | 计算机射线照相的标准方法（用于CR的标准实施方法）(可激射线发光[PSL]法) |
| Standard Practice for Computed Radiology (Photostimulable Luminescence Method) |
| ASTM E2104-2009 | 优质航空与涡轮材料和构件射线照相检验的标准方法 |
| Standard Practice for Radiographic Examination of Advanced Aero and Turbine Materials and Components |
| ASTM E2120-2000 | 便携式X射线荧光光谱仪测量涂膜中铅含量的性能评估规程 |
| Practice for the Performance Evaluation of the Portable X-Ray Fluorescence Spectrometer for the Measurement of Lead in Paint Films |
| ASTM E2339-2004 | 无损评价中的数字成像和通讯 |
| Digital Imaging and Communication in NDE（DICONDE） |
| ASTM E2422-2011 | 铝铸件标准参考数字射线图像（钛和钢铸件也适用） |
| Standard Digital Reference Images for Al. Casting(Titanium & steel Casting also available) |
| ASTM E2445-2005(2010) | 计算机射线照相系统的长期稳定性与鉴定的标准方法（用于CR系统的质量认定和长期稳定性的标准实施方法） |
| Standard Practice for Qualification and Long-Term Stability of Computed Radiology Systems |
| ASTM E2446-2005(2010) | 计算机射线照相系统分类的标准方法（用于CR系统分类的标准实施方法） |
| Standard Practice for Classification of Computed Radiology Systems |
| ASTM E2597-2007e1 | 数字探测器阵列制造特性的标准规程 |
| Standard Practice for Manufacturing Characterization of Digital Detector Arrays |
| ASTM E2660-2011 | 航空用优质钢铸件标准参考数字射线图像 |
| Standard Digital Reference Images for Investment Steel Castings for Aerospace Applications |
| ASTM E2662-2009 | 航空用平面与夹芯复合材料射线照相检验的标准方法 |
| Standard Practice for Radiologic Examination of Flat Panel Composites and Sandwich Core Materials Used in Aerospace Applications |
| ASTM E2669-2011 | 数字射线照相（DR）检测方法的数字图像与通信无损评价（DICONDE）的标准方法 |
| Standard Practice for Digital Imaging and Communication in Nondestructive Evaluation (DICONDE) for Digital Radiographic (DR) Test Methods |
| ASTM E2698-2010 | 使用数字探测器阵列的射线照相检验标准方法 |
| Standard Practice for Radiological Examination Using Digital Detector Arrays |
| ASTM E2736-2010 | 数字探测器阵列射线照相检测标准指南 |
| Standard Guide for Digital Detector Array Radiology |
| ASTM E2737-2010 | 评价数字探测器阵列性能和长期稳定性的标准方法 |
| Standard Practice for Digital Detector Array Performance Evaluation and Long-Term Stability |
| ASTM E2738-2011 | 使用计算机射线照相（CR）检测方法的数字图像与通讯无损评价（DICONDE）的标准方法 |
| Standard Practice for Digital Imaging and Communication Nondestructive Evaluation (DICONDE) for Computed Radiography (CR) Test Methods |
| ASTM E2767-2011 | 使用X射线计算机层析（CT）检测方法的数字图像与通讯无损评价（DICONDE）的标准方法 |
| Standard Practice for Digital Imaging and Communication in Nondestructive Evaluation (DICONDE) for X-ray Computed Tomography (CT) Test Methods |
| ASTM E2861-2011 | 测量中子辐射束发散与校准的标准试验方法 |
| Standard Test Method for Measurement of Beam Divergence and Alignment in Neutron Radiologic Beams |
| ASTM F629-1997 | 铸造金属外科手术植入物射线照相检查实施方法(F-4) |
| ASTM F727-1981 | 透明照相干版透光度测量的试验方法 |
| Test Method for Measuring Transmittance of See-Through Photoplate |
| ASTM F784-1982 | 校准放射性同位素密封测试仪的试验方法 |
| Test Method for Calibrating Radioisotope Hermetic Test Apparatus |
| ASTM F864-1984 | 硬表面玻璃照相干板的检验 Inspection of Hard-Surface Glass Photoplates |
| ASTM F947-1985 | 测定照相胶片低能级X射线辐射灵敏度的试验方法 |
| Test Method for Determining Low-Level X-Radiation Sensitivity of Photographic Films |
| ASTM F1035-1991 | 使用橡胶帘布圆盘验证轮胎X射线成象系统的辩别能力 |
| Use of Rubber-Cord Pie Disk to Demonstrate the Discernment Capability of a Tire X-Ray Imaging System |
| ASTM F1039-1987 | X射线安全屏系统中测量低剂量X辐射的试验方法 |
| Test Method for Measurement of Low Level X-Radiation Used in X-Ray Security Screening Systems |
| ASTM F1467-1999 | 微电子装置电离辐射效应中X射线测试仪(近似等于10keV辐射量子)的使用 |
| Use of an X-Ray Tester (is Approximately Equal to 10 keV Photons) in Ionizing Radiation Effects Testing of Microelectronic Devices |
| ASTM PS95-1998 | 便携式X射线荧光(XRF)装置现场测定涂料或其它涂层含铅量的质量体系的标准临时操作规程 |
| Standard Provisional Practice for Quality Systems for Conducting In Situ Measurements of Lead Content in Paint or Other Coatings using Field-Portable X-Ray Fluorescence (XRF) Devices |
| ASTM PS 116-1999 | 测量涂膜含铅量用的便携式X射线荧光光谱仪性能评价的临时操作规程 |
| Provisional Practice for the Performance Evaluation of the Portable X-Ray Fluorescence Spectrometer for the Measurement of Lead in Paint Films |
| ANSI/ANS6.1.1-1991 | 中子及ｒ射线对剂量因素的影响 Neutron and Gamma-Ray Fluence-to-Dose Factors |
| ANSI/IEEE 309-1970 | 盖革-弥勒计数器的试验程序 Geiger-Muller Counters, Test Procedure for |
| ANSI IT9.2-1991 | 成象介质-已处理的照相胶片、平板和相纸-归档盒及储存箱 |
| Imaging Media - Photographic Processed Films, Plates and Papers - Filing Enclosures and Storage Containers |
| ANSI IT9.8-1989 | 成象介质-照相胶片耐折强度的测定 |
| Imaging Media - Photographic Film - Determination of Folding Endurance |
| ANSI N13.2-1969 | 辐射监测的管理规程指南 Administrative Practices in Radiation Monitoring, Guide to |
| ANSI N13.5-1972 | 直读和非直读式袖珍X和γ射线辐射剂量仪的性能 |
| Direct Reading and Indirect Reading Pocket Dosimeters for X- and Gamma Radiation, Performance |
| ANSI N13.7-1983 | 辐射防护 照相胶片剂量仪 性能标准 |
| Radiation Protection - Photographic Film Dosimeters - Criteria for Performance |
| ANSI N13.11-2001 | 个人剂量测定的试验标准 Personnel Dosimetry Performance, Criteria for Testing |
| ANSI N13.27-1981 | 袖珍式报警辐射剂量仪和报警记数率计的性能要求 |
| Performance Requirements for Pocket-Sized Alarm Dosimeters and Alarm Ratemeters |
| ANSI N15.36-1994 | 核材料 无损化验测量的控制和保证 |
| Nuclear materials - Nondestructive assay measurement control and assurance |
| ANSI N15.37-1981 | 核材料控制的自动无损化验系统指南 |
| Automation of Nondestructive Assay Systems for Nuclear Materials Control, Guide to |
| ANSI N42.16-1986 | 用于液体闪烁计数器的密封放射检查源的规范 |
| Specifications for sealed radioactive check sources used in liquid-scintillation counters |
| ANSI N42.20-1995 | 个人辐射监视仪的性能标准 Performance criteria for active personnel radiation monitors |
| ANSI N42.26-1995 | 辐射防护仪器 监测设备 X和γ辐射个人报警装置 |
| Radiation Protection Instrumentation - Monitoring Equipment - Personal Warning Devices for X and Gamma Radiations |
| ANSI N43.3-1993 | 通用辐射安全 非医疗应用的X射线和密封γ射线源的安装 能量达10Mev |
| General radiation safety - Installations using non-medical X-ray and sealed gamma-ray sources, energies up to 10 MeV |
| ANSI N43.6-1997 | 密封放射性源的分类 Classification of Sealed Radioactive Sources |
| ANSI N43.9-1991 | γ射线照相 仪器的设计和试验规范 |
| Gamma Radiography - Specifications for Design and Testing of Apparatus |
| ANSI N322-1996 | 直接和间接读取石英纤维袖珍剂量计的检验和试验规范 |
| Inspection and Test Specifications for Direct and Indirect Reading Quartz Fiber Pocket Dosimeters |
| ASME SE-1647 | 确定射线照相对比灵敏度的推荐实施方法 |
| ASME Code Case 2476 | 使用荧光成像板的射线照相 |
| Radiography using phosphor imaging plates |
| MIL-HDBK-55-66 | 射线照相无损检测手册(已由MIL-HDBK-728/5取代) |
| MIL-STD-139A-65 | 射线检测铝镁合金铸件的完好性要求 |
| MIL-STD-453C-88 | 射线照相检测 |
| MIL-STD-746A-63 | 铸造爆破器材的射线照相检测要求 |
| MIL-STD-779-68 | 钢焊缝参考χ射线照片(由ASTM E390取代) |
| MIL-STD-1257A-87 | 钴铬合金枪管射线照相及目视检验 |
| MIL-R-11470A-71 | 对射线检验设备,操作方法和操作人员的合格审查(由MIL-STD-453取代) |
| MIL-I-36013B-72 | 折迭式χ射线观片灯 |
| MIL-R-45226-62 | 石墨的射线照相检测(已停用) |
| MIL-R-45774A(92) | 铝,镁导弹零件熔焊完好性要求-射线照相检测 |
| MIL-STD-1948(91) | 中子射线照相检验的术语和定义汇编 |
| MIL-HDBK-728/5(92) | 射线照相检验 |
| MIL-HDBK-733(92) | 复合材料无损检验方法-射线照相法 |
| MIL-STD-1166A(91) | 固体火箭推进剂射线照相检验要求 |
| MIL-STD-1264B(93) | 钢焊缝完好性射线照相检验-与ASTM E390 各级参考底片比较 |
| MIL-STD-1265A(92) | 钢铸件射线照相检验分类和完好性要求 |
| MIL-STD-1894A(86) | 不完全焊透钢焊缝的射线照相参考标准及射线照相程序 |
| MIL-STD-1895A(86) | 不完全焊透铝焊缝的射线照相参考标准及射线照相程序 |
| BAC 5915 | (美国波音公司) 射线检验 |
| DPS 4.736 | (美国麦道公司) 射线检验 |
| API 1104 | (美国石油协会) 管道及有关设备的焊接 |
| AWS B 5.15 | 射线照相评片资格技术条件 |
射线检测（RT）国外相关标准目录
鲁公网安备37010402000739号 )
提升卡
置顶卡
变色卡
千斤顶
显身卡
