国际标准: |
ISO 3059:2001 | 无损检验--渗透检验和磁粉检验 观察条件 黑光源的间接评定方法(GB/T 5097-2005 IDT) |
Non-destructive testing-Penetrant testing and magnetic particle testing-Viewing conditions |
ISO 3452-1998 | 无损检验--渗透检验--一般规则 |
Non-destructive testing-Penetrant inspection-General principles |
ISO 3452-1:2008 | 无损检测 渗透检测 第1 部分:总则(GB/T 18851.1-2012 IDT) |
Non-destructive testing -- Penetrant testing -- Part 1: General principles |
ISO 3452-2:2006 | 无损检验--渗透检验--第2部分:渗透材料的检测 (GB/T 18851.2-2008 IDT) |
Non-destructive testing-Penetrant testing-Part 2: Testing of penetrant materials |
ISO 3452-3:2001 | 无损检验--渗透检验--第3部分:参考试块 (GB/T 18851.3-2008 IDT) |
Non-destructive testing-Penetrant testing-Part 3: Reference test blocks |
ISO 3452-4:1998 | 无损检验--渗透检验--第4部分:设备 (GB/T 18851.4-2005 IDT) |
Non-destructive testing-Penetrant testing-Part 4: Equipment |
ISO 3452-5:2008 | 无损检验--渗透检验--第5部分:温度高于50℃的渗透检测 |
ISO 3452-6:2008 | 无损检验--渗透检验--第5部分:温度低于10℃的渗透检测 |
ISO 3453:1984 | 无损检验--液体渗透检验--校验方法 |
Non-destructive testing-Liquid penetrant inspection-Means of verification |
ISO 3879-77 | 焊接接头的液体渗透检验 |
ISO 4987:1992 | 钢铸件--渗透检验 |
Steel castings-Penetrant inspection |
ISO 4386/3:1992 | 金属多层滑动轴承 第三部分:渗透无损检验 |
Plain bearings-Metallic multilayer plain bearings-Part 3: Non-destructive penetrant testing |
ISO 9583:1993 | 外科植入材料-金属外科植入材料的液体渗透检查 |
ISO 9916:1991 | 铝合金和镁合金铸件--液体渗透检验 |
Aluminium alloy and magnesium alloy castings-Liquid penetrant inspection |
ISO 9935:1992 | 无损检验--渗透探伤仪--一般技术要求 |
Non-destructive testing-Penetrant flaw detectors-General technical requirements |
ISO 12706:2009 | 无损检测 渗透检测 词汇(GB/T 12604.3-2005 IDT 20110474-T-469 ISO 12706:2000) |
Non-destructive testing -- Penetrant testing --Vocabulary |
ISO 12095:1994 | 承压无缝和焊制钢管 渗透检验 |
Seamless and welded steel tubes for pressure purposes-Liquid penetrant testing |
ISO 23277:2006 | 焊缝无损检测 焊缝的渗透检测 验收等级 |
欧洲标准化委员会标准: |
EN 571/1:1997 | 无损检测 渗透检测 一般原理 |
Non destructive testing-Penetrant testing-Part 1:General principles |
EN 571/2:1996 | 无损检测 渗透检测 渗透材料试验 |
EN 571/3:1998 | 无损检测 渗透检测 参考试块 |
EN 623/1: | 先进技术陶瓷 一般性能和结构性能 着色渗透检测法 |
EN 956:1992 | 无损检测 渗透检测 设备 |
EN 1289:1998 | 焊接的无损检测 焊接的渗透检测 验收等级 |
Non-destructive examination of welds-Penetrant testing of welds-Acceptance levels |
EN 1330/6: | 无损检测词汇 渗透剂系统所用术语 |
EN 1371/1:1997 | 铸件 液体渗透检查 砂型、金属型和低压型模铸件 |
EN 1371/2:1998 | 铸件 液体渗透检查 熔模铸件 |
EN 1956: | 无损检测 渗透检测和磁粉检测 |
EN ISO 3059:2001 | 无损检测 渗透检测和磁粉检测 观察条件 |
Non-destructive testing-Penetrant testing and magnetic particle testing-Viewing conditions(ISO 3059:2001) |
EN ISO 3452-2:2006 | 无损检测 渗透检测 第2部分:渗透材料的检验 |
Non-destructive testing-Penetrant testing-Part 2:Testing of penetrant materials(ISO 3452-2:2006) |
EN ISO 3452-3:1998 | 无损检测 渗透检测 第3部分:参考试块 |
Non-destructive testing-Penetrant testing-Part 3:Reference test blocks(ISO 3452-3:1998) |
EN ISO 3452-4:1998 | 无损检测 渗透检测 第4部分:设备 |
Non-destructive testing-Penetrant testing-Part 4:Equipment(ISO 3452-4:1998) |
EN ISO 3452-5:2008 | 无损检测 渗透检测 第5部分:50℃温度以上的渗透检测 |
Non-destructive testing - Penetrant testing - Part 5: Penetrant testing at temperature higher than 50 degrees C (ISO 3452-5:2008) |
EN ISO 3452-6:2008 | 无损检测 渗透检测 第6部分:10℃温度以下的渗透检测 |
Non-destructive testing - Penetrant testing - Part 6: Penetrant testing at temperatures lower than 10 degrees C (ISO 3452-6:2008) |
EN 10228/2:1998 | 钢锻件无损检测 渗透检测 |
EN 10246/11:2000 | 钢管的无损检测 无缝和焊接钢管表面缺陷的液体渗透检测 |
EN ISO 12706:2000 | 无损检测 术语 渗透检测 |
Non-destructive testing-Terminology-Terms used in penetrant testing(ISO 12706:2000) |
美国: |
AMS 2644D | 检验材料-渗透剂 Inspection Material, Penetrant D |
AMS-2647 B-99 | 用于飞机和发动机零件维修的荧光渗透检查(K) |
AMS 3155D | 溶剂去除型油基荧光渗透剂 Oil, Fluorescent Penetrant, Solvent- Soluble(Noncurrent Aug 99) D |
AMS-3156C-83 | 可水洗型油基荧光渗透剂(K) |
AMS 3157C-80 | 溶剂去除型强荧光油基荧光渗透剂 Oil Fluorescent Penetrant, High Fluorescence,Solvent Soluble C |
AMS 3158B-99 | 水基荧光渗透剂 Solution, Fluorescent Penetrant, Water Base B |
AS 3071B | 磁粉检验,荧光渗透和着色渗透检验的验收标准 |
AS 7114 | 7114 美国宇航局与国防部订约授权程序(NADCAP)要求-无损检测 |
AS 7114/ 1 | 美国宇航局与国防部订约授权程序(NADCAP)要求-着色渗透无损检测设备的审定 |
ASTM A462-76 | 钢锻件的液体渗透检验方法 |
ASTM A 903/A 903M-1999 | 钢铸件 磁粉和液体渗透检验的表面验收标准 |
Steel Castings, Surface Acceptance Standards, Magnetic Particle and Liquid Penetrant Inspection |
ASTM B137-72 | 铝表面阳极化镀层的着色试验方法 |
ASTM D129-64(1978) | 石油产品含硫量的标准试验方法(通用密封弹法) |
ASTM D808-63(1976) | 石油产品含氯量的标准试验方法(密封弹法) |
ASTM D1226 | 确定总含硫量的灯泡法 |
ASTM D1317 | 烃氧基钠试验法 |
ASTM D1552 | 硫杂质的确定方法 |
ASTM E165/E165M-2012 | 一般工业液体渗透检验的标准试验方法 Standard Practice for Liquid Penetrant Examination for General Industry |
ASTM E270-88 | 液体渗透检验术语定义 |
ASTM E433-1997(2008) | 液体渗透检验的标准参考照片 Standard Reference Photographs for Liquid Penetrant Inspection |
ASTM E1208-2010 | 亲油性后乳化型荧光液体渗透检测标准试验方法 |
Standard Practice for Fluorescent Liquid Penetrant Testing Using the Lipophilic Post-Emulsification Process |
ASTM E1209-2010 | 水洗型荧光液体渗透检测标准试验方法 |
Standard Practice for Fluorescent Liquid Penetrant Testing Using the Water-Washable Process |
ASTM E1210-2010 | 亲水性后乳化型荧光液体渗透检测标准试验方法 |
Standard Practice for Fluorescent Liquid Penetrant Testing Using the Hydrophilic Post-Emulsification Process |
ASTM E1219-2010 | 溶剂去除型荧光液体渗透检测标准试验方法 |
Standard Practice for Fluorescent Liquid Penetrant Testing Using the Solvent-Removable Process |
ASTM E1220-2010 | 溶剂去除型着色液体渗透检测标准试验方法 |
Standard Practice for Visible Penetrant Testing Using Solvent-Removable Process |
ASTM E1417/E1417M-2011e1 | 液体渗透检测标准试验方法 Standard Practice for Liquid Penetrant Testing |
ASTM E1418-2010 | 水洗型着色渗透检测标准试验方法 |
Standard Practice for Visible Penetrant Testing Using the Water-Washable Process |
ASTM E1135-1997(2012) | 比较荧光渗透剂亮度的标准试验方法 |
Standard Test Method for Comparing The Brightness of Fluorescent Penetrants |
ASTM E2297-2004(2010) | 液体渗透和磁粉方法用UV-A与可见光源及强度计使用的标准的指南 |
StandardGuide for use of UV-A and Visible Light Sources and Meters used in the Liquid Penetrant and Magnetic Particle Methods |
ASTM F97-72(1997) | 用着色渗透法确定电子器件密封性的推荐方法(F-1) |
Determining Hermeticity of Electron Devices by Dye Penetration |
ASTM F601-98 | 金属外科手术植入物荧光渗透检查标准实施方法(F-4) |
MIL-I-25135E-89 | 渗透检验材料 (84年版在NDT,89-12) |
MIL-I-6866-89 | 渗透检验方法 |
MIL-F-38762(1)(68) | 荧光渗透检验设备 |
MIL-HDBK-728/3(92) | 液体渗透检验 |
BAC 5423 | (美国波音公司)渗透检验 |
DPS 4.707 | (美国麦道公司)荧光渗透检验 |
DPS 4.707-1 | 着色渗透检验 |
DPS 4.707-2 | 荧光渗透检验--适用性 |
日本: |
JIS Z2340-2002 | 磁粉检测和液体渗透检测使用目视校准规校准的验证方法 |
Confirmation method of calibration by visual calibration gauge on magnetic particle and liquid penetrant testing |
JIS Z 2343-1-2001 | 无损试验 渗透试验 第1部分-一般原理 渗透检测方法与渗透显示的等级分类 |
Non-destructive testing - Penetrant testing - Part 1: General principles - Method for liquid penetrant testing and classification of the penetrant indication |
JIS Z 2343-2-2001 | 无损试验 渗透试验 第2部分-渗透材料试验 |
Non-destructive testing - Penetrant testing - Part 2: Testing of penetrant materials |
JIS Z 2343-3-2001 | 无损试验 渗透试验 第3部分-参考试块 |
Non-destructive testing - Penetrant testing - Part 3: Reference test blocks |
JIS Z 2343-4-2001 | 无损试验 渗透试验 第4部分-设备 |
Non-destructive testing - Penetrant testing - Part 4: Equipment |
JIS Z 2343-1992 | 液体渗透检验方法及缺陷显示的等级分类 (WSTS89-2,90-3) |
METHOD FOR LIQUID PENETRANT TESTING AND CLASSIFICATION OF THE INDICATION |
JIS W 0904-1995 | 宇航用液体渗透检验 LIQUID PENETRANT INSPECTION FOR AEROSPACE USE |
NDIS 3302-78 | 渗透探伤用B型标准试片 |
NDIS 3210-84 | 渗透检验方法 |
NDIS 3201-84 | 渗透探伤剂硫、卤素分析方法 |
德国: |
DIN 54152T1-79 | 渗透检验操作程序 |
DIN 54152T2-83 | 渗透检验材料的评定 |
DIN 55943-2001 | 着色材料术语和定义 Colouring materials - Terms and definitions |
DIN EN 571-1-1997 | 无损检测 渗透检测 第1部分:一般原理 |
Non-destructive testing - Penetrant testing - Part 1: General principles |
DIN EN 1289-2002 | 焊缝的无损检测 焊缝的渗透检测 验收等级 |
Non-destructive testing of welds - Penetrant testing of welds - Acceptance levels |
DIN EN 1371-2-1998 | 铸造 渗透检测 第2部分:熔模铸件 |
Founding - Liquid penetrant inspection - Part 2: Investment castings |
DIN EN 10228-2-1998 | 钢锻件的无损检测 第2部分:渗透检测 |
Non-destructive testing of steel forgings - Part 2: Penetrant testing |
DIN EN 10246-11-2000 | 钢管的无损检测 第11部分:探测无缝和焊接钢管表面不完整性的液体渗透检测 |
Non-destructive testing of steel tubes - Part 11: Liquid penetrant testing of seamless and welded steel tubes for the detection of surface imperfections |
DIN EN ISO 12706-2001 | 无损检测术语 第6部分:渗透检测 |
Non-destructive testing - Terminology - Part 6: Terms used in penetrant testing |
DIN EN ISO 3452-2-2000 | 无损检测 渗透检测 第2部分:渗透材料试验 |
Non-destructive testing - Penetrant testing - Part 2: Testing of penetrant materials |
DIN EN ISO 3452-3-1999 | 无损检测 渗透检测 第3部分:参考试块 |
Non-destructive testing - Penetrant testing - Part 3: Reference test blocks |
DIN EN ISO 3452-4-1999 | 无损检测 渗透检测 第4部分:设备 |
Non-destructive testing - Penetrant testing - Part 4: Equipment |
DIN ISO 4386-3-1992 | 滑动轴承 多层金属滑动轴承 无损渗透检测 |
Plain bearings; metallic multilayer plain bearings; non-destructive penetrant testing; identical with ISO 4386-3:1992 |
英国: |
BS M39:72(1998) | 航空航天材料和零件的渗透检查方法 |
BS 4416-69 | 金属熔焊和气焊的渗透检验方法 |
BS 4489:1984 | 无损检测 黑光源的评定方法 |
BS 3683-1-1985 | 无损检测术语-第一部分-渗透检测 |
BS 6443-84(1985) | 渗透探伤方法 |
BS 7585/3:1992 | 金属多层普通滑动轴承-渗透无损检测方法-ISO 4386-3-1992 |
BS 7730:1994 | 金属外科植入物的液体渗透检测方法-ISO 9583-1993 |
BS EN 571-1-1997 | 无损检测 渗透检测 一般原理 Non-destructive testing - Penetrant testing - General principles |
BS EN 623/1:1995 | 工程陶瓷检测 着色渗透法检测 |
94/701264 DC | 焊接的无损检测 焊接的渗透检测 合格的水平和标准 (根据BS EN 1289) |
BS EN 10228-2-1998 | 锻钢件的无损检测-渗透检测 Non-destructive testing of steel forgings - Penetrant testing |
BS EN 10246-11-2000 | 钢管的无损检测 探测无缝和焊接钢管表面不完整性的液体渗透检测 |
Non-destructive testing of steel tubes - Liquid penetrant testing of seamless and welded steel tubes for the detection of surface imperfections |
BS EN 1289-1998 | 焊缝的无损检测 焊缝的渗透检测 验收等级 |
Non-destructive examination of welds - Penetrant testing of welds - Acceptance levels |
BS EN 1371-1-1997 | 铸造-渗透检测-砂型铸造、金属模铸造和低压模铸造 |
BS EN 1371-2-1998 | 铸造-渗透检测-熔模铸造 Founding - Liquid penetrant inspection - Investment castings |
BS EN ISO 3059-2001 | 无损检测-渗透检测和磁粉检测-观察条件 |
Non-destructive testing - Penetrant testing and magnetic particle testing - Viewing conditions |
BS EN ISO 3452-2-2000 | 无损检测-渗透检测-第2部分-渗透检测材料的试验 |
Non-destructive testing - Penetrant testing - Testing of penetrant materials |
BS EN ISO 3452-3-1999 | 无损检测-渗透检测-第3部分-参考试块 |
Non-destructive testing - Penetrant testing - Reference test blocks |
BS EN ISO 3452-4-1999 | 无损检测-渗透检测-第4部分-设备 Non-destructive testing - Penetrant testing - Equipment |
BS EN ISO 12706-2001 | 无损检测术语-渗透检测 Non-destructive testing - Terminology - Terms used in penetrant testing |
法国: |
NF A04-161-85 | 铸钢件的渗透探伤 |
NF A04-181-85 | 高强度铜合金铸件的渗透探伤 |
NF A04-191-2-1998 | 铸造 液体渗透检验 第2部分:熔模铸件 |
Founding. Liquid penetrant inspection. Part 2 : investment castings. |
NF A04-315-2-1998 | 钢锻件的无损检测 第2部分:渗透检测 |
Non-destructive testing of steel forgings. Part 2 : penetrant testing |
NF A09-020-6-2001 | 无损检测术语 渗透检测 Non-destructive testing - Terminology - Terms used in penetrant testing |
NF A09-120-84 | 渗透检验方法一般原理 |
NF A09-120-2-2000 | 无损检测 渗透检测 第2部分:渗透材料试验 |
Non-destructive testing - Penetrant testing - Part 2 : testing of penetrant materials |
NF A09-120-3-2001 | 无损检测 渗透检测 第3部分:参考试块 |
Non-destructive testing - Penetrant testing - Part 3 : reference test blocks |
NF A09-120-4-1999 | 无损检测 渗透检测 第4部分:设备 Non-destructive testing - Penetrant testing - Part 4 : equipment |
NF A09-122-83 | 渗透探伤用渗透剂性能的检查 |
NF A09-123-85 | 渗透探伤灵敏度和适用性 |
NF A09-130-85 | 黑光灯特性标记 |
NF A09-400-78 | 渗透探伤名词术语 |
NF A09-599-2001 | 无损检验 渗透检验和磁粉检验 观察条件 |
Non-destructive testing - Penetrant testing and magnetic particle testing - Viewing conditions |
NF A49-875-11-2000 | 钢管的无损检验 第11部分:探测无缝和焊接钢管表面不完整性的液体渗透检测 Non-destructive testing of steel tubes - Part 11 : liquid penetrant testing of seamless and welded steel tubes for the detection of surface imperfections. |
NF A89-541-1998 | 焊缝的无损检验 焊缝的渗透检测 验收等级 |
Non-destructive testing of welds - Penetrant testing of welds - Acceptance levels |
NF A89-541/A1-2002 | 焊缝的无损检验 焊缝的渗透检测 验收等级 |
Non-destructive testing of welds - Penetrant testing of welds - Acceptance levels |